DJI AGRAS T30

Rp 125.050.000

Key Features:

  • 30L Spray Tank.
  • Spherical Radar System.
  • IP67 Water and Dust Resistance.
  • Dual FPV Cameras for Monitoring.
  • High Precision Operation.
  • Smart Agriculture Cloud Platform

 

+ -

With a 30L spray tank, the Agras T30 agriculture drone has an adjustable 7 – 9 meter spray width, and can cover up to 15 – 18 hectares per hour. Despite this large capacity, Agras T30 is still compact, foldable, and easy to transport. The battery and tank can be quickly replaced for continuous operations. The T30 has an RTK module for precise positioning, along with omnidirectional radar for obstacle avoidance and terrain following.

Orchard Mode is an important Agras drone feature for trees, where the T30 spraying drone can use 3D map data to systematically stop at each tree, spray it, and then continue to the next.

The Agras T30 can also be used with the Spreading System 2.0 attachment to spray pellets and solids. This enables many additional applications for seeding, fertilizers, and crop protection.

INFORMATION DESCRIPTION

Feature

Hourly work efficiency 40 acres
High-precision radar √ Spherical Omnidirectional Radar System
Remote control planning accuracy √ (RTK/GNSS)
Pipe air exhaust √ One button Air Discharge
3D operation planning by the AI smart engine
High-precision flowmeter √ (Dual-channel electromagnetic flowmeter with an error of ±2%)
Level gauge Continuous level gauge (with real-time pesticide load detection and intelligent supply-point prediction)
Maximum spray flow 7.2L/min (with the XR11001 nozzle) 8L/min (with the XR110015 optional nozzle)
Pesticide tank installation method Fixed pesticide tank
Battery installation method Removable batteries
Single remote control for multiple drones √ (Single remote control for up to three drones)
D-RTK technology
Top-view radar module
Flight laser function
Intelligent endurance/return function
Intelligent supply-point prediction
Front-view FPV
Rear-view FPV
Coordinated turning function
Branch targeting technology

Drone parameters

Total weight (without batteries) 26.4 kg
Maximum take-off weight 76.5 kg (near sea level)
Maximum thrust-to-weight ratio 1.70 @ takeoff weight of 66.5 kg
Hovering precision (with good GNSS signal) With D-RTK enabled: ±10 cm (horizontal) and ±10 cm (vertical) With D-RTK disabled: ±0.6m (horizontal) and ±0.3m (vertical) (with the radar function enabled: ±0.1m)
RTK and GNSS frequency bands RTK: GPS L1/L2, GLONASS F1/F2, BeiDou B1/B2, and Galileo E1/E5 GNSS: GPS L1, GLONASS F1, and Galileo E1
Maximum power consumption 11,000 W
Hovering power consumption 10,000 W (@ takeoff weight of 66.5 kg)
Hovering endurance 20.5min (@29,000 mAh & takeoff weight of 36.5 kg) 7.8min (@29,000 mAh & takeoff weight of 66.5 kg)
Maximum pitch angle 15°
Maximum operating flight speed 7 m/s
Maximum level speed 10 m/s (with good GNSS signal)
Maximum tolerable wind speed 8 m/s
Maximum flight altitude 4,500m *Reduce the pesticide load by 12% for each increase of 1,000 meters in altitude.
Recommended operating ambient humidity < 93%
Recommended operating ambient temperature 0℃ to 45℃

Chassis parameters

Maximum rotor distance 2,145 mm
Dimensions 2,858 mm × 2,685 mm × 790 mm (with arms and blades unfolded) 2,030 mm × 1,866 mm × 790 mm (with arms unfolded and blades folded) 1,170 mm × 670 mm × 857 mm (with arms folded)

Power system - Motor

Stator size 100×18 mm
KV value 77 rpm/V
Maximum pull 18.7 kg/rotor
Maximum power 3,600 W/rotor
Weight 756 g

Power system - Propellers

Diameter × pitch 38×20 inch
Weight (with a single blade) 106 g

Power system - ESC

Maximum operating current (continuous) 60 A
Maximum operating voltage 60.9 V (14S LiPo)

FPV cameras

View angle (FOV) Horizontal: 129°, vertical:82°
Resolution 1,280×720 15-30 fps

FPV searchlights

Maximum light intensity 13.2 lux @ 5-meter direct light

Spraying system - Operation tank

Operation tank volume 30L at full load
Operating load 30 kg at full load

Spraying system - Nozzles

Nozzle model SX11001VS (standard) SX110015VS (optional) Fruit tree drones: TX-VK04 (optional)
Nozzle quantity 16
Maximum spray flow SX11001VS: 7.2L/min SX110015VS: 8L/min TX-VK4:3.6 L/min
Atomized particle size SX11001VS : 130 - 250 μm SX110015VS : 170 - 265 μm TX-VK4: 110 - 135 μm (depending on the actual operating environment, spray flow, and other factors)
Maximum effective spray width 4-9 m (with 12 nozzles and a distance of 1.5 to 3 meters to crops)

Spraying system - Water pump

Water pump model Plunger pump
Operating voltage 60 V
Maximum flow 4 L/min ×1

Spraying system - Flowmeter

Flow measurement range 0.25 - 20 L/min
Flow measurement error < ±2%
Measurable liquid Conductivity > 50 μS/cm, typical liquids: Tap water or aqueous organic or inorganic pesticides

Omnidirectional obstacle avoidance radar

Model RD2424R
Operating frequency SRRC/NCC/FCC: 24.05 - 24.25 GHz MIC/KCC/CE: 24.05 - 24.25 GHz
Operating power consumption 12 W
Equivalent isotropic radiated power (EIRP) SRRC: < 13 dBm; NCC/MIC/KCC/CE/FCC:< 20 dBm
Height maintenance and terrain adaptation Height measurement range: 1-30 m Height-maintenance range: 1.5-15 m Maximum slope in mountain mode:35°
Obstacle avoidance system Perceivable distance: 1.5-30 m View angle (FOV): Horizontal: 360°, vertical: ±15° Conditions of use: The relative altitude of the drone must be greater than 1.5 m and the speed less than 7 m/s Safety distance: 2.5 m (the distance between the tip of the propeller and the obstacle after the drone decelerates to a hover) Obstacle avoidance direction: Horizontally omnidirectional obstacle avoidance
Water-resistance rating IP67

Top-view radar

Model RD2414U
Operating frequency SRRC/NCC/FCC:24.05 - 24.25 GHz MIC/KCC/CE:24.05 - 24.25 GHz
Overhead obstacle avoidance Perceivable distance: 1.5-10 m View angle (FOV): 80° Conditions of use: During take-off, landing, and climbing when the relative distance between the drone and the object above is greater than 1.5 m Safety distance: 2 m (the distance between the highest point on the top of the drone and the obstacle after the drone brakes and hovers stably) Obstacle avoidance direction: Above the drone
Water-resistance rating IP67
Equivalent isotropic radiated power (EIRP) SRRC:< 13 dBm; NCC/MIC/KCC/CE/ FCC:< 20 dBm
Operating power consumption 4 W

Battery

Model BAX501-29,000mAh-51.8V
Weight Approximately 10.1 kg
Discharge rate 11.5C
Water-resistance rating IP54 with board-level potting protection
Capacity 29,000 mAh
Voltage 51.8 V

Remote control

Model RM500-ENT
Operating frequency of the Ocusync Industry Edition 2.4000 - 2.4835 GHz 5.725 - 5.850 GHz
Effective signal range at the Ocusync Industry Edition operating frequency (without interference and blockage) SRRC: 5 km; MIC/KCC/CE: 4 km; FCC: 7 km (measured when the operating height of the drone is 2.5 m)
EIRP of the operating frequency of the Ocusync Industry Edition 2.4 GHz SRRC/CE/MIC/KCC: 18.5 dBm; FCC: 29.5 dBm; 5.8 GHz SRRC: 20.5 dBm; FCC: 28.5 dBm CE:12.5 dBm
Wi-Fi protocols Wi-Fi Direct, Wireless Display, and 802.11a/g/n/ac Supports 2 × 2 MIMO Wi-Fi
Wi-Fi operating frequency 2.4000 - 2.4835 GHz 5.150 - 5.250 GHz 5.725 - 5.850 GHz
Wi-Fi EIRP 2.4 GHz SRRC/CE: 18.5 dBm; FCC/MIC/KCC:20.5 dBm; 5.2 GHz SRRC/FCC/CE/MIC: 14 dBm; KCC: 10 dBm; 5.8 GHz SRRC/FCC: 18 dBm; CE/KCC: 12 dBm;
Bluetooth protocol Bluetooth 4.2
Bluetooth operating frequency 2.4000 - 2.4835 GHz
Bluetooth EIRP SRRC/MIC/FCC/CE/KCC:6.5 dBm
Positioning GPS+GLONASS dual mode
Display screen 5.5-inch screen with a resolution of 1920×1080, brightness of 1,000 cd/m², and Android OS
Operating memory (RAM) 4GB LPDDR4
Storage space (ROM) A microSD card with 32 GB and extensible storage space for up to 128 GB, transfer speed rated as UHS-I Speed Grade 3
HDMI HDMI 1.4
Supported drones T30 and T10 agricultural drones
Operating power consumption 18 W
Operating ambient temperature -10℃ to 40℃
Storage ambient temperature -30℃ to 60℃ (within 1 month) -30℃ to 45℃ (more than 1 month and less than 3 months) -30℃ to 35℃ (more than 3 months and less than 6 months) -30℃ to 25℃ (more than 6 months) (with built-in batteries charged to 40% to 60%)
Charging ambient temperature 5℃ to 40℃

Built-in batteries of the remote control

Built-in batteries 18650 lithium-ion battery (5,000 mAh at 7.2V)
Battery life 2 hours
Charging method Use a standard 12V/2A USB fast charger
Charging time 2.5 hours (use the 12V/2A USB fast charger when the remote control is powered off)
Power supply current/voltage of the remote control USB-A port 5 V / 1.5 A

External smart battery of the remote control

Model WB37-4,920mAh-7.6V
Battery type 2S LiPo
Capacity 4,920 mAh
Voltage 7.6 V
Capacity 37.39 Wh
Charging ambient temperature 5℃ to 40℃
Battery life 2 hours

Charging assistant of the remote control external smart battery

Model WCH2
Input voltage 17.3 - 26.2 V
Output voltage and current 8.7V and 6A
Operating ambient temperature 5℃ to 40℃

Power adapter of the external smart battery charging assistant

Model A14-057N1A
Input voltage 100 - 240V and 50/60 Hz
Output voltage 17.4 V
Rated power 57 W

T30 Spreading System 3.0

Spreading system weight 3.9kg
Maximum opening area 44.6 cm²
Applicable materials Solid dry particles with a diameter of 0.5 to 5 mm
Spreading tank volume 40L
Maximum load of the spreading tank 35kg
Water-resistance rating IP67
Input voltage Power: 60V Control:15V
Maximum power [email protected] [email protected]
Recommended operating ambient temperature 0℃ to 40℃
Dimensions 560×435×320mm
Maximum rotation speed 1,300 RPM

T30 smart charging manager

Dimensions 300×280×230 mm
Total weight 11.5 kg
Input voltage 100-264 Vac
Output voltage 40-60 V
Rated power 7,200
Charging current 120 A
Charging time Fully charges a battery in 9 to 12 minutes
Charging voltage accuracy +/-0.1 V
Charging current accuracy +/-1 A
Output channel quantity 2
Protection functions Over-temperature, over-voltage, under-voltage, short-circuit, and fan stall protection
Charging ambient temperature -20℃ to 45℃

Charging safety

AC wire protection, power wire protection, and charge connector protection
 

Aircraft Body × 1 | Tool Box x 1 | Remote Controller × 1 | Remote Controller Intelligent Battery x 1 | Intelligent Battery Charging Hub x 1 | Remote Controller Lanyard x 1 | Charging Hub AC Power Cable x 1 | RTK Dongle x 1 | USB Charger x 1 | USB-C Cable x 1 | 4G Dongle x 1

When buying from Halo Robotics, you can be confident that you are working with Indonesia’s leading drone experts. As the only Gold level DJI Enterprise distributor in Indonesia, Halo Robotics operates a fully warranty and aftersales service center in Jakarta, and is the only company in Indonesia able to guarantee authorized DJI Enterprise products with full Indonesia warranty, along with direct phone and email access to our certified Repairs Centre with DJI-qualified drone technicians. And we guarantee that we will have the best prices on the market — if not, let us know, and we will match any price (conditions apply).

WARRANTY DETAILS
MC: 12 Months
Gimbal Camera: 6 Months
Propulsion system (excluding propellers): 6 Months
Remote Controller: 6 Months
Battery: 6 Months and Charge Cycle less than 200 Times
Battery Charger: 12 Months
Frame: No warranty
Propeller: No warranty

Legal Name: PT. Halo Indah Permai
Authorized Distributor (STP Kemendag): DJI Enterprise, DJI Agriculture
629/STP-LN/SIPT/1/2021

DJI Aftersales Service Center, Jakarta:
Pondok Pinang Center, Block C16-18
Jl. Ciputat Raya, Pondok Pinang, Kebayoran Lama
Jakarta, Indonesia, 12310
Phone Number & WhatsApp: +62 812-8251-8882
Attention/PIC: Halo Robotics Aftersales
For warranty confirmations and aftersales service procedures, please contact: [email protected]

Certified Drone Training Programs:
DJI Enterprise Basic & Advanced Drone Training Programs for Every Application
FASI Remote Pilots License (RPL): Certified Instructors for FASI Drone Licensing
Directorate General of Civil Aviation (DGCA): Certified Instructors for DGCA Drone Pilot Licensing
Flyability Aerial Indoor Inspection Methodology (AIIM): Certified Training Center – Indonesia
Pix4D Photogrammetry Software Training: Certified Instructors for Pix4D Certification Programs
For more information about Halo Robotics training programs, please contact: [email protected]

Company Operating Certifications & Licenses:
ISO 9001: 2015 119353
ISO 14001: 2015 119354
ISO 45001: 2018 119360
For additional certifications, references, and competency ratings, please contact: [email protected]


Close My Cart

Close
Navigation
Categories