Manifold 3 Accessory Kit (Matrice 400)

Connects and secures Manifold 3 to the Matrice 400 aircraft.

1. When installing the coaxial cable, ensure the cable screws are fully tightened to prevent disconnection or reduced water resistance due to flight vibrations.

2. Use the 1.5mm screwdriver bit to press the Manifold 3 reset button to restore factory settings.

Connector (Matrice 400) × 1

Coaxial Cable (Matrice 400) × 1

Connector Screw (Matrice 400) × 6

Connector Screw (Manifold 3) × 6

Coaxial Cable Screw (Matrice 400) × 2

Coaxial Cable Screw (Manifold 3) × 2

Screwdriver Handle × 1

Screwdriver Bit (Phillips and 2.5mm hex) × 1

Screwdriver Bit (1.5mm and 2.0mm hex) × 1

Weight: 24.3 g (connector, cable, and required screws only)

Manifold 3

DJI Matrice 400