Maximized Precision, Enhanced Range
The new multifunctional station D-RTK 3 integrates a high-performance antenna and receiver module capable of tracking and resolving data from major global satellite navigation systems, and supports multiple data transmission links. D-RTK 3 can function as a base station to provide centimeter-level positioning for multiple drones simultaneously or extend the operational range of drones in relay station mode. In addition, the new rover station mode, combined with DJI Enterprise and DJI Terra applications, provides a comprehensive solution for high-precision aerial surveying applications, ensuring safe and accurate operations.
Multiple Modes, Versatile Control
Base Station Mode: Supports Simultaneous Operation of Multiple Models
The D-RTK 3 supports the latest O4 Enterprise video transmission with four external directional antennas, enabling 15km video transmission in base station broadcast mode while ensuring a stable signal in all directions. Operators only need to install one D-RTK 3 without additional configuration, allowing multiple drones to connect to the base station and access centimeter-level positioning.
Relay Station Mode: Break Through Limitations
Switch the D-RTK 3 to Relay Station mode and install it at an elevated location in areas with significant signal interference, such as urban or valley environments. This mode will increase the video transmission distance and extend the operational range of the Matrice 4 Series up to 25 km.
D-RTK 3 supports obstacle sensing with Matrice 4 Series, enabling real-time calculation of obstacles and signal quality between relay stations, remote controllers, and drones. The operator can adjust the position of the drone based on instructions from the remote controller to ensure optimal communication quality.
Rover Station Mode: Flexible and Efficient
In addition to serving as a base station, the D-RTK 3 can also be used as a rover station to collect control point coordinates, improve UAV aerial survey accuracy, and increase survey precision.
Effortless High-Precision Positioning
Stronger Performance, More Accurate Positioning
The D-RTK 3 uses an airborne dielectric antenna with a filtering system, effectively tracking low-elevation satellites. The antenna’s phase-center accuracy is maintained at the millimeter level, ensuring strong resistance to multipath interference and enabling high-precision positioning, even in complex environments.
With the built-in receiver module, D-RTK 3 can receive satellite data from 5 major satellite systems across 19 frequency points. Compared to RTK networks, D-RTK 3 provides more accurate and stable positioning results under the influence of the ionosphere.
Standalone Precise Point Positioning (PPP)
D-RTK 3 utilizes DJI’s PPP solution, enabling satellite-based automatic convergence. Thus providing free decimeter-level positioning, even in challenging network conditions.
*Currently only supports BeiDou PPP-B2b.
Network High-Precision Calibration
The D-RTK 3 can receive RTCM data and automatically acquire the correct coordinates and position via the network. When used outdoors, it can achieve precise centimeter-level positioning without pre-measuring the location of the setup point.
DJI Integrated Mapping Solution
New DJI Enterprise App
Supports Ground Control Point (GCP) Setup and Tilt Compensation
Install the latest DJI Enterprise app on android devices to measure GCP coordinates without a third party. When used with RTK-enabled DJI drones, DJI’s solution can efficiently complete the entire high-precision surveying workflow.
The D-RTK 3 has a built-in high-precision IMU, enabling CP measurement when the pole is held at an angle without a tripod or ensuring a vertical base station, significantly improving operational efficiency in complex measurement environments.
Supports Projection Coordinate Conversion
The DJI Enterprise app includes a mainstream projection coordinate database, allowing direct output of planar coordinates.
Compatible with DJI Terra for Efficient Data Processing
One-Click Import, Time-Saving and Effortless
The rover measurement results can be exported as CP files via the DJI Enterprise app and imported into DJI Terra without the need for additional format customization. With powerful algorithms, high-precision results can be easily generated.
Supports Local PPK
D-RTK 3 supports recording of raw satellite observation data. When imported into DJI Terra version 4.4 or higher along with data from Matrice 4E, local PPK calculations can be performed with just one click.
Supported Models
Base Station Mode:
Enterprise:
DJI Matrice 4 series
DJI Matrice 3D/3TD*
Matrice 300/350 RTK*
Matrice 30 Series*
DJI Mavic 3 Enterprise Series*
Agriculture:
T60*
T50/T25*
T40/T20P*
DJI FlyCart 30*
Professional Filmmaking:
DJI Inspire 3*
* Currently, only manual D-RTK 3 position calibration is supported. Please refer to official updates for future feature enhancements.
Relay Station Mode:
Supports Matrice 4E/Matrice 4T
Rover Station Mode:
Supports Bluetooth 5.1, compatible with Android 10 and above*
Accessories & Payloads
D-RTK 3 Multifunctional Station
Rp23.722.000
Accessories & Payloads