Rp 999.999.999
Designed to be carried by drones & ground vehicles
Captures georeferenced & timestamped gas & particle concentrations
Real-time data transmission via LTE networks
Multi-gas Detection Hardware
Up to 9 Parameters at a Time
Size 157 x 103 x 87mm
Weight 400 – 500g
Ultra compact & lightweight structural design: 158x103x88mm, 400~500g depending on the sensing module selection (drone integration kits not included).
Anti EMI aluminium air-tight gas chamber with internal vibration reduction mechanism.
Active air intake with approx. 5L/min flow rate when subject to zero additional resistance.
Support 5VDC 2.5A Max (USB Type-C), or 7~32VDC 2A Max (XT30) power input.
Support ultra-low power consumption “Dormant Mode”, in which the most crucial sensing components still remain working when Sniffer4D V2 is not powered. “”Dormant Mode”” helps Sniffer4D V2 achieve negligible warm-up time after powering up. Energy storage component <1.11Wh with auto charging, charging time <60 min, lasts for >40 days per charge.
1GHz ARM CPU and 512MB RAM.
6 LEDs indicating Sniffer4D V2’s working status: sensor assembly, GNSS, SD card, LTE, drone communication, and external device.
Built-in LTE connectivity with no external antenna. Support global 4G, 3G, EDGE, and GPRS network. A micro SIM card needs to be provided by the user.
Real-time encrypted data transmission (1Hz) with data retrieval algorithm.
Encrypted data output port (USB Type-C), allowing data transmission in user-specified communication channels (e.g. a private LTE network).
Plaintext data output port (USB Type-C), enabling easy communication with other devices (e.g. a flight controller).
Built-in high-precision Global Navigation Satellite System (GNSS) with not external antenna. Supports GPS, GLONASS, Galileo, and Beidou.
Front & rear high-brightness RGB warning LEDs with solid or blinking options. The LEDs can be configured to automatically vary their color according to the gas/PM concentrations.
Swarm supported. One or multiple Sniffer4Ds can communicated with one or multiple PCs.
Fully support DJI Payload SDK (PSDK) V2 (a M300 RTK or M210 series integration kit needs to be selected, see below). The user can view Sniffer4D’s real-time data or control Sniffer4D using DJI Pilot App running on the DJI remote controller.
Support mission data backup with Sniffer4D’s built-in SD card module.
Support Over-the Air (OTA) firmware update.
Soarability Sniffer4D V2 Base Unit x 1
When buying from Halo Robotics, you can be confident that you are working with Indonesia’s leading drone experts. As the only Gold level DJI Enterprise distributor in Indonesia, Halo Robotics operates a fully warranty and aftersales service center in Jakarta, and is the only company in Indonesia able to guarantee authorized DJI Enterprise products with full Indonesia warranty, along with direct phone and email access to our certified Repairs Centre with DJI-qualified drone technicians. And we guarantee that we will have the best prices on the market — if not, let us know, and we will match any price (conditions apply).
WARRANTY DETAILS
MC: 12 Months
Gimbal Camera: 6 Months
Propulsion system (excluding propellers): 6 Months
Remote Controller: 6 Months
Battery: 6 Months and Charge Cycle less than 200 Times
Battery Charger: 12 Months
Frame: No warranty
Propeller: No warranty
Legal Name: PT. Halo Indah Permai
Authorized Distributor (STP Kemendag): DJI Enterprise, DJI Agriculture
629/STP-LN/SIPT/1/2021
DJI Aftersales Service Center, Jakarta:
Pondok Pinang Center, Block C16-18
Jl. Ciputat Raya, Pondok Pinang, Kebayoran Lama
Jakarta, Indonesia, 12310
Phone Number & WhatsApp: +62 812-8251-8882
Attention/PIC: Halo Robotics Aftersales
For warranty confirmations and aftersales service procedures, please contact: [email protected]
Certified Drone Training Programs:
DJI Enterprise Basic & Advanced Drone Training Programs for Every Application
FASI Remote Pilots License (RPL): Certified Instructors for FASI Drone Licensing
Directorate General of Civil Aviation (DGCA): Certified Instructors for DGCA Drone Pilot Licensing
Flyability Aerial Indoor Inspection Methodology (AIIM): Certified Training Center – Indonesia
Pix4D Photogrammetry Software Training: Certified Instructors for Pix4D Certification Programs
For more information about Halo Robotics training programs, please contact: [email protected]
Company Operating Certifications & Licenses:
ISO 9001: 2015 119353
ISO 14001: 2015 119354
ISO 45001: 2018 119360
For additional certifications, references, and competency ratings, please contact: [email protected]
Halo is Indonesia’s leader in commercial drones. We understand your business and provide full solutions for specific requirements.
We objectively recommend the most cost-effective options to achieve your objectives and drive high return on investment.
Consultation, demos, training, service and aftersales support. We are committed to deliver real results with service excellence.
Phone: +6221 7699 123
WhatsApp: +62811 8549 888
Email: [email protected]
Available: 08:30 – 17:30 (GMT+7)
PT. Halo Indah Permai
Kawasan Pondok Pinang Centre Lantai 3
Jl. Ciputat Raya, Pondok Pinang, Kebayoran Lama.
Kota ADM. Jakarta Selatan, DKI Jakarta 12310
Copyright 2015 © All Rights Reserved. Design by Halo Robotics.
Indonesian 
English