EMLID REACH M+

Rp 6.600.000

Key Features:

  • RTK positioning for navigation
  • PPK for UAV mapping
  • Centimeter accuracy without ground control points
  • Sync directly with Camera hot shoe port
  • Control with ReachView app
+ -

Single-band positioning with centimeter accuracy in RTK and PPK, for precise drone mapping with less GCPs.

Reach M+ modules directly connect to the drone camera hot shoe port, which is synced with the camera shutter: this enables Reach M+ to log time and coordinates of each photo with the highest possible level of accuracy – less than a microsecond, for precise georeferencing.

– RTK Up to 10 km
– PPK Up to 20 km
– Time to Fix: 1-2 mins
– RINEX logging update rate up to 14 Hz

INFORMATION

DESCRIPTION

Mechanical

Dimensions 56.4 x 45.3 x 14.6 mm
Weight 35 g
Operating tº -20…+65 ºC

Electrical

Input voltage on USB and JST GH 4.75 - 5.5 V
Antenna DC bias 3.3 V
Avg. consumption @5V 200 mA

Positioning

Static horizontal 5 mm + 1 ppm
Static vertical 10 mm + 2 ppm
Kinematic horizontal 7 mm + 1 ppm
Kinematic vertical 14 mm + 2 ppm

Connectivity

LoRa radio (sold separately) Frequency range 868/915 MHz
Distance Up to 8 km
Wi-Fi 802.11b/g/n
Bluetooth 4.0/2.1 EDR
Ports USB, UART, Event

Data

Corrections NTRIP, VRS, RTCM3
Position output NMEA, LLH/XYZ
Data logging RINEX with events with update rate up to 14 Hz
Internal storage 8 GB

GNSS

Signal tracked GPS/QZSS L1, GLONASS G1, BeiDou B1, Galileo E1, SBAS
Number of channels 72
Update rates 14 Hz / 5 Hz
IMU 9DOF
 

Reach M+ module x 1 | USB cable x 1 | USB-OTG cable x 1 | JST-GH 6-pin to jumper pin cable x 1 | JST-GH 5-pin to jumper pin cable x 1

When buying from Halo Robotics, you can be confident that you are working with Indonesia’s leading drone experts. As the only Gold level DJI Enterprise distributor in Indonesia, Halo Robotics operates a fully warranty and aftersales service center in Jakarta, and is the only company in Indonesia able to guarantee authorized DJI Enterprise products with full Indonesia warranty, along with direct phone and email access to our certified Repairs Centre with DJI-qualified drone technicians. And we guarantee that we will have the best prices on the market — if not, let us know, and we will match any price (conditions apply).

WARRANTY DETAILS
MC: 12 Months
Gimbal Camera: 6 Months
Propulsion system (excluding propellers): 6 Months
Remote Controller: 6 Months
Battery: 6 Months and Charge Cycle less than 200 Times
Battery Charger: 12 Months
Frame: No warranty
Propeller: No warranty

Legal Name: PT. Halo Indah Permai
Authorized Distributor (STP Kemendag): DJI Enterprise, DJI Agriculture
629/STP-LN/SIPT/1/2021

DJI Aftersales Service Center, Jakarta:
Pondok Pinang Center, Block C16-18
Jl. Ciputat Raya, Pondok Pinang, Kebayoran Lama
Jakarta, Indonesia, 12310
Phone Number & WhatsApp: +62 812-8251-8882
Attention/PIC: Halo Robotics Aftersales
For warranty confirmations and aftersales service procedures, please contact: [email protected]

Certified Drone Training Programs:
DJI Enterprise Basic & Advanced Drone Training Programs for Every Application
FASI Remote Pilots License (RPL): Certified Instructors for FASI Drone Licensing
Directorate General of Civil Aviation (DGCA): Certified Instructors for DGCA Drone Pilot Licensing
Flyability Aerial Indoor Inspection Methodology (AIIM): Certified Training Center – Indonesia
Pix4D Photogrammetry Software Training: Certified Instructors for Pix4D Certification Programs
For more information about Halo Robotics training programs, please contact: [email protected]

Company Operating Certifications & Licenses:
ISO 9001: 2015 119353
ISO 14001: 2015 119354
ISO 45001: 2018 119360
For additional certifications, references, and competency ratings, please contact: [email protected]


Close My Cart

Close
Navigation
Categories